Training requirements

Minimum mandatory training required for authorisation:

• Ausgrid’s Electrical Safety Rules (ESRs)
• Ausgrid’s Environmental Procedures (NS174)
• HLTAID001- Provide Cardiopulmonary Resuscitation
• UETTDRRF06B - Perform rescue from a live LV panel
• UETTDRRF09B - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10B - Provide first aid in an ESI environment
• CPCCOHS1001A- SafeWork NSW General Construction Induction (White Card)

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1A
• SC1100A- Safe work near underground assets or equivalent
• UET30612 - Certificate III in ESI - Power Systems - Distribution 
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRRF11A - Testing of Connections to LV Electricity Networks

Minimum mandatory training required for authorisation:

• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1B
• SC1100A – Safe work near underground assets or equivalent
• UET30812 - Certificate III in ESI - Power Systems - Distribution Cable Jointing
• UETTDRCJ21A – Lay ESI cables
• UETTDRCJ22A – Install and maintain de-energised low voltage underground paper insulated cables
• UETTDRCJ23A – Install and maintain de-energised high voltage underground paper insulated cables
• UETTDRCJ26A – Install and maintain de-energised low voltage underground polymeric cables
• UETTDRCJ27A – Install and maintain de-energised high voltage underground polymeric cables
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRRF11A – Testing of Connections to LV Electricity Networks
  
   

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• Electrical Trade Qualification or Power System Linesman Trade or Cable Jointing Trade
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1C
• SC1100A - Safe work near underground assets or equivalent
• UETTDRCJ21A - Lay ESI cables
• UETTDRCJ26A - Install and maintain de-energised low voltage underground polymeric cableS
• UETTDRCJ27A - Install and maintain de-energised high voltage underground polymeric cables
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRRF11A - Testing of Connections to LV Electricity Networks

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1X
• SC1100A – Safe work near underground assets or equivalent
• UEE30811 - Certificate III in Electrotechnology Electrician
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1X
• SC1100A – Safe work near underground assets or equivalent
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1X
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre
• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1X
• SC1100A – Safe work near underground assets or equivalent
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• Apprenticeship Training Contract as a Cable Jointer from the Australian Apprenticeship Centre
• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1X
• SC1100A – Safe work near underground assets or equivalent
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

• Apprenticeship Training Contract as a Line Worker from the Australian Apprenticeship Centre
• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1X
• SC1100A – Safe work near underground assets or equivalent
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• AHCPCM205 - Fell Small Trees
• AHCPCM204 - Recognise plants
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1X
• TLILIC0005 - Licence to operate a boom-type elevating work platform (boom length 11 metres or more)
• UET20319 - Certificate II ESI – Powerline Vegetation Control Pathways
• UETTDREL14A  or UETTDREL16A or NS209 - Working safely near live electrical apparatus
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF03 - Perform EWP rescue
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF08 - Perform EWP controlled descent escape
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRVC24 - Assess vegetation and recommend control measure in an ESI environment
• UETTDRVC25A - Use EWP to cut vegetation near live electrical apparatus
• UETTDRVC26 - Cut vegetation at ground level near live electrical apparatus
• UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• AHCPCM205 - Fell Small Trees
• AHCPCM204 - Recognise plants
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1X
• UET20319 - Certificate II ESI – Powerline Vegetation Control Pathways
• UETTDREL14A  or UETTDREL16A or NS209 - Working safely near live electrical apparatus
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRVC24 - Assess vegetation and recommend control measure in an ESI environment
• UETTDRVC26 - Cut vegetation at ground level near live electrical apparatus
• UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• AHCPCM205 - Fell Small Trees
• AHCARB204A - Undertake standard climbing techniques
• AHCPCM204 - Recognise plants
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 1X
• UET20319 - Certificate II ESI – Powerline Vegetation Control Pathways
• UETTDREL14A  or UETTDREL16A or NS209 - Working safely near live electrical apparatus
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF08 - Perform EWP controlled descent escape
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRVC21 - Use climbing techniques to cut vegetation above ground near live electrical apparatus
• UETTDRVC24 - Assess vegetation and recommend control measure in an ESI environment
• UETTDRVC26A - Cut vegetation at ground level near live electrical apparatus
• UETTDRVC33 - Apply pruning techniques to vegetation control near live electrical apparatus
• UETTDRVC34 - Provide release & rescue from a tree

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

There are minimum mandatory requirements for all individuals who are required to work on, or near, Ausgrid’s network.

• Ausgrid’s Electrical Safety Rules (ESRs)
• Ausgrid’s Environmental Procedures (NS174)
• HLTAID001– Provide Cardiopulmonary Resuscitation
• UETTDRRF06B- Perform rescue from a live LV panel
• UETTDRRF09B- Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10B- Provide first aid in an ESI environment
• CPCCOHS1001A- SafeWork NSW General Construction Induction (White Card)

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum required mandatory training for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• Meet requirements for Class 2D - Metering & Energizing Installations 
• NSW Department of Planning, Industry & Environment Registration letter Class 2A
• Previously authorised with Category 1 – Disconnect and Reconnect as at the 30 December 2016
• UETTDREL16 - Working safely near live electrical apparatus
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRRF11A – Testing of Connections to LV Electricity Networks

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum required mandatory training for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• Electrical Trade Qualification or Power System Distribution Cable Jointing Trade
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 2B
• UETTDRIS55A – Install and maintain low voltage underground services
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRRF11A – Testing of Connections to LV Electricity Networks

Minimum mandatory training required for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• Electrical Trade Qualification or Power System Distribution Cable Jointing Trade
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 2B
• UETTDRCJ21A – Lay ESI cables
• UETTDRCJ26A – Install and maintain de-energised low voltage underground polymeric cables
• UETTDRIS55A – Install and maintain low voltage underground services
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRRF11A – Testing of Connections to LV Electricity Networks

Minimum mandatory training required for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• Electrical Trade Qualification or Power System Distribution Overhead Linesman Trade
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 2C
• UETTDRIS56A – Install and maintain low voltage overhead services
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRRF11A – Testing of Connections to LV Electricity Networks

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• Apply Enviro sustainable energy procedures in energy sector or Cat 4 - Metering & Energising
• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• Install and replace power system meters and associated equipment 
• NSW Department of Planning, Industry & Environment Registration letter Class 2D
• UEE30811 - Certificate III in Electrotechnology Electrician
• UETTDREL16 - Working safely near live electrical apparatus
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• UETTDRRF11A – Testing of Connections to LV Electricity Networks

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains.

Minimum mandatory training required for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• Electrical Certificate or Licence 
• Electrical Trade Qualification or Power System Linesman Trade or Cable Jointing Trade
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 2X
• UETTDREL16 - Working safely near live electrical apparatus
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Minimum mandatory training required for authorisation:

• Apprenticeship Training Contract as an Electrician from the Australian Apprenticeship Centre
• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 2X
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
  
   

Minimum mandatory training required for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 2X
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Minimum mandatory training required for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• NSW Department of Planning, Industry & Environment Registration letter Class 2X
• UETTDREL14 - Working safely near live electrical apparatus as a non electrical worker 
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Minimum mandatory training required for authorisation:

• Ausgrid’s Electrical Safety Rules (ESRs)
• Ausgrid’s Environmental Procedures (NS174)
• HLTAID001- Provide Cardiopulmonary Resuscitation
• UETTDRRF06B - Perform rescue from a live LV panel
• UETTDRRF09B - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10B - Provide first aid in an ESI environment
• CPCCOHS1001A- SafeWork NSW General Construction Induction (White Card)

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• APR0068 - Ausgrid - Access Permit Recipient (Restricted)
• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• Individual Authorisation Agreement
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
  
   

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• Individual Authorisation Agreement
• TTDO1653 - Application of Overhead Low Voltage Short Circuits
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• Application of Overhead Access Permit and Working Earths Ladder or Combined
• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• Individual Authorisation Agreement
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF02 - Perform Pole Top Rescue 
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• Application of Overhead Access Permit and Working Earths EWP or Combined
• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• Individual Authorisation Agreement
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF03 - Perform EWP rescue
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF08 - Perform EWP controlled descent escape
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• Individual Authorisation Agreement
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF02 - Perform Pole Top Rescue 
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• Working safely near live electrical apparatus

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains. 

Minimum mandatory training required for authorisation:

• Ausgrid Authorisation Session (eLearn course)
• Ausgrid’s Environmental Procedures (NS174) 
• CPCCOHS1001A - SafeWork NSW General Construction Induction (White Card) or equivalent
• HLTAID001 - Provide cardiopulmonary resuscitation
• Individual Authorisation Agreement
• UETTDRRF01 - Apply ESI safety rules, codes of practice and procedures for work
• UETTDRRF03 - Perform EWP rescue 
• UETTDRRF06 - Perform rescue from a live LV panel
• UETTDRRF08 - Perform EWP controlled descent escape
• UETTDRRF09 - Apply access procedures to work on or near electrical network infrastructure
• UETTDRRF10 - First Aid in an ESI Environment
• Working safely near live electrical apparatus

Note: Scroll down this page to see additional training requirements for all individuals who are required to work in the vicinity of underground or overhead mains.